Eau00137
Engine stop switch ENGINE STOP The engine stop switch is a safety device for use in an emergency such as when the motorcycle overturns or if trouble occurs in the throttle system. Turn the switch to RUN to start the engine. In case of emergency, turn the switch to OFF to stop the engine. Fuel reserve switch FUEL This switch should usually be kept ON while riding. If you run out of fuel while riding, move the switch to RES and refuel at the first opportunity. Then move the switch to ON. When the...
Eau00152
The clutch lever is located on the left handlebar, and the ignition circuit cutoff system is incorporated in the clutch lever holder. Pull the clutch lever to the handlebar to disengage the clutch, and release the lever to engage the clutch. The lever should be pulled rapidly and released slowly for smooth clutch operation. Refer to the engine starting procedures for a description of the ignition circuit cut-off system.
Eau02976
Starting a cold engine requires a richer air-fuel mixture. A separate starter circuit supplies this mixture. Move in direction to turn on the starter choke . Move in direction to turn off the starter choke . UNLEADED FUEL Fuel tank capacity Total 13.5 L 3.0 Imp gal, 3.6 US gal Reserve
Info Nxj
6. Rear shock absorber spring preload adjusting ring 8. Starter choke j page 3-9 page 3-1 page 3-6 page 3-4 13. Front turn signal position light page 6-30 14. Rear brake pedal page 3-4 1. Clutch lever page 3-3 3. Front brake lever page 3-4 4. Throttle grip page 6-14 5. Right handlebar switches page 3-3 6. Left handlebar switches page 3-2 Main Indicator Handlebar Clutch Shift Front brake Rear brake Fuel tank Starter choke Steering Helmet Rear shock absorber Sidestand clutch switch operation 1....