Radiator Removal Installation
Drain the coolant from the system by removing the drain bolt on the water pump (page 6-5).
Disconnect the fan motor 2P (Black) connector.
Disconnect the horn connectors. Remove the horn bolt and horn.
Disconnect the water hoses and tubes from the i adiatoi.
Remove the radiator mounting bolts, washers and nut.
Remove the radiator from the mounting boss of the frame.
Remove the air guide rubber from the engine. Installation is in the reverse order of removal.
Set the air guide rubber properly, being careful not to pinch it between the frame and radiator.
Fill and bleed the cooling system (page 6-4).
Be careful not to damage the radiator fins while servicing the radiator.
AIR GUIDE RUBBER
Post a comment